Skip to main content

Franklin Manufacturing, Inc.

Designed to be Different; Engineered to Endure
About Us
Contact Us
Site Map
Member Login
CNC Fabricators
Beam Line
Bus Bar
Gap Frame Press
Plate Duplicator
Plasma Punch
Plate Drill
3 Spindle Drill
Angle Line
Metal Building Systems
Gantry Crane
Hydraulic Punch Press
Hydraulic Shear
Hydraulic Coper
Hydraulic Power Unit

CNC 3 Spindle Drill


The HD-145x44 system is designed to fabricate steel parts that are too large for hydraulic punch and shear systems. Parts are cut to length using an optional hydraulic CNC Saw. It has several optional material handling systems including conveyors, pusher assemblies, saw measuring systems, beam turning devices, and material transfer/storage units. Standard drill lines are designed to handle material ranging from 300 to 750 pounds per foot.



Video Player Designed for Microsoft Windows Internet Explorer


  • - Maximum X-Axis Speed - 130 feet per minute
  • - Infeed hydraulic pinch roll drive for measuring and driving the leading section of material
  • - Pressure switch material detection for side clamp to automatically find the width
  • - Vertical hold-down rolls on both sides
  • - Precision measuring wheel for overall X-axis length and hole location
  • - X-Axis length accuracy at ±.030"- AC servo drive system synchronized with infeed / outfeed conveyors



    Video Player Designed for Microsoft Windows Internet Explorer


    - Outfeed pinch roll drive system for measuring and driving the trailing end of material complete with all above features

  • - Pinch roll clamps are self adjusting to individual section sizes automatically









    Conveyor and Material Handling



    A touch-screen control provides the operator programmable length input and various material handling controls. Based on your application (weight and material flow requirements), FMI can provide various material handling systems.









    Band Saw



    The back-stop carriage has a pneumatic probe device that senses the front of the material. When contact is made, the conveyor drive system decelerates and creeps into position. The back-stop is designed to hydraulically lock into the programmed position. The "In Position" sensor locks the conveyor drive system until the saw cycle is complete. This unique design prevents the material from making any "hard-stop" contact with the carriage unit.





    Model Cut Width @90° Blade Size Blade Drive Miter Capability Hyd Web Clamp Vise Control Frame Cant
    M36-3Cx44 44" (48" Opening) 2"x .063" (2-5/8" Opt) 15Hp w/Variable digital blade speed Hyd Powered ± 45° w/digital display Standard Hydraulic Full Stroke 6 degrees
    B25-3Cx44 44" (48" Opening) 2"x .063" (2-5/8" Opt) 15Hp w/Variable digital blade speed None Optional Hydraulic Full Stroke 6 degrees


    - Operators Manual / Parts List

  • - Frame Canted 6 degrees
  • - AC Inverter Drive with Digital Blade Speed
  • - Variable Vise & Hold-down Clamping Pressure
  • - Hydraulic Powered Blade Brush
  • - Hydraulic Blade Tension with Indicator
  • - Hydraulic Positioned Guide Arm
  • - Built-in Coolant System with Controls
  • - Spring Loaded Carbide Guides
  • - Built-in Work Lights


    Video Player Designed for Microsoft Windows Internet Explorer